Mobile Car detailing – Sealants Or Waxs?

Sealants Vs. Wax

We get asked over and over again what is the difference between a sealant and a wax. Ultimately, they both help to protect the paint on your vehicle, but that is just the easy answer to this question. However, it isn’t that simple. Making the choice between sealant and wax comes down to climate, lifestyle, and personal preference. To truly understand what is best for your vehicle and you, we will be providing you with a rundown to give you a better understanding of both of these kinds of products.

Wax

Various products that are labeled as “wax” may vary significantly from combination polish waxes to man-made polymers, all the way up to Carnauba wax, which is the holy grail when it comes to natural waxes. Although the science of wax has developed over many years, enthusiasts, collectors, and detailers all agree that the wax that they prefer to use on their cars is natural Carnauba wax. Carnauba is derived from the Tree of Life palm in Brazil and the results that it provides may be characterized as bringing a finish to life. Wax sits on top of the paint and creates a liquid wet finish and deeper hues to give the paint a breathable and natural protection from environmental contaminants, oxidation, moisture, heat, and UV rays.

You may think the combination polish wax sound like another great choice and can help to eliminate one of the steps in protecting and polishing your finish. However, those products have a tendency to offer a compromise. With this type of product, the wax works as a lubricant but doesn’t enable the polish to be nearly as effective. Also, the grit in the polish doesn’t enable the wax to really coat. That is why we recommend that you properly wash and polish your car in order to remove any surface contaminants prior to taking any protective measures. As we will be discussing below, whenever you choose to use wax, you are selecting an option that might require more time.

Lifestyle comes into play in the sealant versus wax debate when we are discussing longevity. Some people really cherish the time that they spend with their cars, applying wax and buffing it up to a brilliant luster. On the other hand, other people would prefer living in the fast lane and simply drive. Wax is best suited for a slower paced life, for traditionalists who love how wax looks and are willing to invest the time every 6 to 8 weeks. A wax job’s durability will depend on things such as the climate and where a vehicle is stored. A car that is stored inside of a climate controlled garage helps to extend the life of its finish. On the other hand, a daily commute in a humid and hot climate most likely will mean that the finish has a shorter life span, which will require applications to occur more frequently to maintain your vehicle’s protective wax finish effectively.

Sealants

Sealants have emerged as the favorite of professional details due to its hard as glass finish, longevity, and ease of use. We like comparing it to the difference between high definition televisions and standard definition ones. Sealants are the HD option. Paint sealants do not have anything natural about them since they are man-made wonders of technology and science that draw the beauty of the paint out and protect it against anything nature tries to throw at it. A sealant, unlike wax which lays on top of the surface, adheres to the surface which creates a protective shell that can last 6 months or even longer.

Those who love wax will tell that the appearance of sealants doesn’t provide the same richness, however, we love the sealant’s glass-like finish; it is a personal preference. So if you would like protection and speed then this could be the best route for you to take. When it comes to detailing, the closest thing that you can get to instant gratification is sealants. The liquid application may be done easily by hand using a polisher or microfiber cloth. Applying sealant requires fewer applications to give your vehicle year-round protection.

Are you searching for the best of both of these worlds?

If you really love a waxed finish’s deep rich color but don’t have enough time to reapply it every few weeks, then you can double down instead. If you apply a Caraunaba wax on top of a sealant it will provide you with the protection and longevity of the sealant along with Caraunaba wax’s rich deep color. You have enjoyed the best of both of these worlds without having to risk the finish of your vehicle getting damage when you don’t have a lot of time.

The post Mobile Car detailing – Sealants Or Waxs? appeared first on Total Car Detailing.

http://bit.ly/2TjwEgt

Using A Foam Cannon For Automotive Detailing

Learn About Using a Foam Gun or Foam Cannon

When the sun comes out, it’s time to bring the guns out…well, foam guns anyway. If you’re using just a hose and bucket, you’ll likely never whip up that rich, thick foam you get to enjoy in an automated car wash. Don’t worry, that’s likely the one and only time we’ll ever say anything nice about a gas station car wash. However, if you add a foam gun to the mix, you, too, can enjoy rich, thick foam. Using a foam gun will also let you use less water, and your rich, thick foam is going to adhere to the surfaces of your vehicle, as it starts breaking down contaminants immediately. You can either use your foam gun for a presoak or even as the main wash. Both of them can help you avoid micro-abrasion since it will both lift up surface dirt as well as lubricate your wash mitt.

You have two different options for foaming, which are contingent upon what equipment you have and your preference. Foam guns can typically be attached to any conventional garden hose, and a quick connection lets you move fast from your foaming into a fireman-type nozzle to do your rinsing; foam cannons, as implied by the name, need more water pressure because they’re the more heavy-duty version. Both of them can create a thick and lasting foam all across your vehicle. Some people in this industry will loosely use the terms of ‘foam gun’ and ‘foam cannon’ quite interchangeably. However, if you put it in television terms, a foam gun is HD, and a foam cannon is Ultra High Def.

If your car is dirtier than usual, you might want to go for the pre-soak before cleaning it with the two-bucket method.

The first thing that you should do is to put the car shampoo in your reservoir before filling with water. The soap is going to sink, so feel free to shake it up good after you attach your gun or cannon. Start with the roof of the vehicle, and then work your way around and down the vehicle. Overlapping is okay because it ensures that you get total coverage. The foam is going to start working instantly in loosening up any dirt that might be on the surfaces. By this time, you should have a nice, thick foam lifting dirt away and giving your wash mitt plenty of lubrication. The two-bucket method involves using one for rinsing, and another for washing; do this to ready your mitt and then wash your vehicle. Follow this up with a rinse either from the pressure washer or your fire-hose nozzle, before you start with any of the other detail work you have planned out.

Foam and rinse if you want a quick wash on a well-maintained vehicle.

Just fill your reservoir with water and soap, and then foam your vehicle from the top down to the bottom, using overlapping techniques to be sure the coverage is total. Let the soap do its working magic for around 5 minutes before rinsing off with the fire-hose nozzle or power washer. Then, dry the vehicle completely in order to prevent any water spots.

For the most part, foam guns and cannons can save you work, water, and time. Get one today.

In our business, we’ve always emphasized high-caliber work, customer satisfaction, and competitive pricing. Customer service has always been a top priority for us. We want to be the business in town that gives customers a great mobile auto car detailing at affordable prices. We’re looking to offer the cities surrounding you the very best in vehicle detailing that is both economical and reliable. We treat every customer as if they are family, and our approach is never repetitive or cookie cutter. We can detail anything you’ve got, be it an RV, truck, SUV, luxury car, sedan, or even a boat. We’ve got a team of specialists standing by to come detail any vehicle you have, and they can meet you at your home or your business. Our approach to detailing focuses on quality over quantity.

The post Using A Foam Cannon For Automotive Detailing appeared first on Total Car Detailing.

http://bit.ly/2T9EKIB

Automotive Detailer Breakdown: How To Get Tree Sap Off Your Car

How To Remove Tree Sap From A Vehicle Without Damaging The Finish

It all begins innocently. In an effort to get out and get some fresh air instead of sitting on the couch watching TV, you decide to head to the park. After arriving, you pull into a spot, parking your car in the shade of a tree to keep it cool while you head off to spend some time in nature. What you didn’t take into account, however, is that trees and sap go hand-in-hand. Unfortunately, by the time you get back to your vehicle, your car may be covered with sticky spots of sap.

Chances are, you probably have heard a lot of different opinions on the best way to remove sap. A close friend or someone else that you trust may have told you that rubbing alcohol is the best option. Before you grab a bottle and dump it on your clear coat, however, take a step back and think about the fact that it could cause damage. To minimize the risk to your vehicle, try following the tips below instead.

To improve your chances of success, you should act as quickly as possible. The longer the sap is allowed to sit on your vehicle’s finish, the more water will evaporate. As a result, it will become stickier and stickier. As it sits there, it can also damage the underlying finish. At first, it may seem like the easiest way to take care of the problem is simply to take your vehicle to the car wash. As it turns out, however, the vast majority of car washes use cold water, which won’t do anything to make the sap softer. Instead, you need to use warm water. When sap comes in contact with warm water, it softens, making it easier to remove.

If the sap is fresh, you may be able to remove it simply by hand-washing your vehicle with warm water. If there is a lot of sap, however, or if it has been sitting for a while, you most likely will need to do a little bit of extra work.

For more severe problems, start by washing your vehicle by hand using warm water. Once you are done, take a close look at the finish, keeping your eyes peeled for any sap that was left behind. Instead of using your fingernail to try to pick it off, reach for your Detail Pro solvent spray along with a soft microfiber cloth. Spray the solvent on to your cloth until it is thoroughly saturated. Then, lay it over the top of the sap. Leave it sitting there for a while so that it has a chance to soften the sap. Because Detail Pro solvent is safe for vehicle paint, you don’t have to worry about it damaging your car’s finish.

Once the sap has been softened by the solvent, you can then wipe it away using the microfiber cloth. Repeat this process as many times as necessary until all of the sap has been removed. The solvent is extremely effective on sticky substances, meaning that it should make quick work of the sap.

Once you get to this phase, the only thing that is left to do is to remove any residual contaminants that were left behind. Use a spray specifically designed for detailing and a fresh microfiber cloth to wipe away any remaining dirt or residue in the affected area. To complete the cleanup process, protect your vehicle’s finish with a quick shot of Detail Pro Spray Wax.

We have always worked to keep our prices competitive and to ensure that all of our customers are satisfied. Our main objective is to make sure that everyone who uses our services is happy with the quality of the work that they receive. We work hard to provide the highest quality mobile vehicle detailing while still offering competitive pricing. If you are looking for an affordable, trustworthy company to detail your vehicle, look no further. We treat every customer the way that we would want to be treated. Instead of taking a one-size-fits-all approach, we take the needs of each customer into account on an individual basis. We provide detailing services for a wide range of vehicles including sedans, SUVs, trucks, boats, luxury vehicles, and even RVs. We can come to your location, whether your vehicle is at home or at work. Thanks to our experience and our high-quality equipment, we can handle any detailing project, no matter what type of vehicle you have.

At Total Car Detailing we are committed to keeping your car clean and cared for. Call us now for your detailing needs or contact us to schedule a detailing time that works best for you. Don’t forget to peek at our blog for more helpful tips on automotive detailing and auto maintenance.

The post Automotive Detailer Breakdown: How To Get Tree Sap Off Your Car appeared first on Total Car Detailing.

http://bit.ly/2SRAa1A

Auto Detailer Breakdown; Fixing Hard Water Spots

Hard Water Spots On Your Car: Fixing And Preventing Them

When it comes to your car, hard water spots are a lot like freckles. They come seemingly from nowhere, and they get worse the longer you let the sunshine on them.

This analogy has its limits: Unlike freckles, hard water spots are pretty universally disliked. And they’re not nearly as hard to get rid of as unwanted freckles.

Yes, we’re going to spend this whole post on hard water spots. That doesn’t mean that they’re a nightmare, though! You don’t need hours of elbow grease or thousands of dollars to get rid of them. We’re going to be thorough about explaining the origins of hard water spots and (hopefully) just as thorough in explaining their removal and prevention.

Hard water spots aren’t hard to understand; most of what you need to know is right there in the name. Whenever water hits your car, the moisture will eventually evaporate. The solids suspended in the water, though, stay behind. There are endless ways your car could end up with hard water spots. Obviously, rain can cause them, but they might also come from errant lawn sprinklers, improper drying after a car wash, or even the neighborhood kids having fun with squirt guns.

Hard water spots can happen even if you live in an area with remarkably soft groundwater. Regardless of its source, most water that hits your car manages to pick up unwanted solids. Raindrops can pick up smoke, dirt, carbon dioxide, smog, and a host of other contaminants. Water that splashes up from the ground can deliver oil, dirt, rubber, or even gross bits of roadside debris like fecal matter. And unless you’re ridiculously cautious about filtering your water when you wash your car (hint: you don’t have to be), most washes will subject your car to all the minerals and chemicals lurking in your community’s water supply.

The solid residue that hard water leaves behind when it dries is nasty stuff. It doesn’t just make your car look bad. The wide range of potential solids we’re talking about includes substances that can cause serious damage to your car’s finish. Just think about the caustic chemicals that give “acid rain” its name. Hard water spots actually concentrate the contaminants and make them more dangerous as the water evaporates away. As corrosive materials in the spots eat away at your vehicle’s paint, they leave behind pits and craters that can retain more water in the future and speed up the deterioration of your finish.

Hopefully, that last paragraph made the dangers of hard water spots clear. The good news is that you can protect your car from this threat with relative ease. This is one of the best and most practical reasons to treat your car to a healthy layer of protective wax after washing and drying it. A good wax job creates a very literal barrier between your paintwork and the threats posed by hard water. The process is easy and affordable. All you need is a decent chamois to do the drying right and our Pro Wax to create the protective barrier.

Of course, this little discussion comes too late for a lot of us. What if your car already has hard water damage? This, too, can be fixed. In this case, you’ll need microfiber cloths and another pair of our products: Hard Water Spot & Scale Remover and Detailing Spray. Use the microfiber cloth to apply the spot remover. Don’t try to do your whole car at once; work the remover into one section (about two square feet) at a time. Apply the detailing spray after the remover.

Once you’ve gotten all the spots off, it’s time to wash your car. Dry it thoroughly and apply a good coat of wax to protect it in the future.

At Total Car Detailing we are committed to keeping your car clean and cared for. Call us now for your detailing needs or contact us to schedule a detailing time that works best for you. Don’t forget to peek at our blog for more helpful tips on automotive detailing and auto maintenance.

The post Auto Detailer Breakdown; Fixing Hard Water Spots appeared first on Total Car Detailing.

http://bit.ly/2RFSD3B